Make your own surge protector for your workbench !

Just an easy project to protect your equipment. This is way better than what you can get with most regular surge outlets. I have other videos about these MOV's to get a better understanding of them. The strip I got was about $20, and the MOV's are cheap when you buy a bunch. You can find good information about them by looking at Bournes or little fuse for MOV specs.
I used a 14D201K MOV and two 180CA TVI diodes. The gas discharge tube was a 350v. Like I said , I have a couple videos on EMP protection and surge protection, if you want a better understanding of these devices. Good luck and be careful with 120 volt circuits.